ID-AL / Waves System
Release notes
EventPlayer and EventPlayer mkII (EP 220 and EP 230) Firmware
December 2018

Firmware Version 2.04

December 2018

Firmware Version 2.03

September 2018

(1) Contact Waves System for further information about this feature.

Firmware Version 2.02

July 2017

Firmware Version 2.01

March 2010

Firmware Version 1.14

October 2009

Firmware Version 1.13

June 2009

Firmware Version 1.12

May 2009

Firmware Version 1.11

April 2009

Firmware Version 1.10

March 2009


The logic and functionality of the player are defined with an internal program called firmware. This program may evolve to bring new features, to change the behavior of the player, or to fix issues. The firmware can be updated or replaced by following these instructions:

  1. Download the firmware from our web site.
  2. Make sure that the SD card is properly formatted in FAT32 (USB flash drives are not supported).
  3. Copy the file EVENT.bin at the root of the SD card.
  4. Eject the SD card with the ejection process of your operating system.
  5. Switch off the player.
  6. Insert the SD card in the player and switch it on. Do not remove the SD card or do not turn off the player until the operation is completed. Wait until the player reboots completely.
  7. At this time, the firmware update is over. The player can be switched off and the SD card removed.

Note: The firmware update has to be done with an SD memory card. The update is not supported with a USB flash drive.

Known issues

© 2018 - Waves System. All Rights Reserved. For more information, see